Specifications

OM20 Universal Outdoor Modem Web Browser/Remote Protocol
MN-OM20– Revision 5 6–52
This alarm will flash on during certain modem parameter
changes. A solid indication points toward a problem with the
incoming clock to the modem (SCTE).
LB Synth PLL: {Pass/Fail, Unmasked/Masked}
Indicates that the Rx L-Band Synthesizer is not locked. This
alarm will flash on during certain modem parameter changes. A
solid indication points toward a configuration problem within the
modem.
LNB Current: {Pass/Fail, Unmasked/Masked}
Indicates that current is either below or above the threshold
limits of the LNB, as specified by the OM20. Only active when
LNB Voltage is enabled.
LNB Voltage: {Pass/Fail, Unmasked/Masked}
Indicates that voltage is not functioning correctly when voltage
is enabled.
Ethernet WAN: {Pass/Fail, Unmasked/Masked}
Indicates that the interface card is faulted and will not pass data
(displays only when the Ethernet Card is installed and the
Ethernet Interface is selected).
MINOR ALARMS
Buffer Underflow: {Pass/Fail, Unmasked/Masked}
Indicates that a Doppler Buffer underflow has occurred.
Buff Near Empty: {Pass/Fail, Unmasked/Masked}
Indicates that the Doppler Buffer is about to underflow.
Buff Near Full: {Pass/Fail, Unmasked/Masked}
Indicates that the Doppler Buffer is about to overflow.
Buffer Overflow: {Pass/Fail, Unmasked/Masked}
Indicates that a Doppler Buffer overflow has occurred.
Rx Data Activity: {Pass/Fail, Unmasked/Masked}
Indicates that there is no Rx Data activity.
Satellite AIS: {Pass/Fail, Unmasked/Masked}
Indicates that AIS has been detected in the receive satellite data
stream.
DnI Frame Lock: {Pass/Fail, Unmasked/Masked}
Indicates if drop/insert data is frame locked.
DnI MFrame Lock: {Pass/Fail, Unmasked/Masked}
Indicates if drop/insert data has multiframe lock.
Insert CRC: {Pass/Fail, Unmasked/Masked}