Technical information

MM200 High-Speed Microwave Modem User Interfaces
TM086 - Rev. 4.1 4-51
4.43 SNMP Test
1. Once it is determined that the MM200 is reachable, compile the custom Management
Information Base (MIB) for use by the Network Management Station (NMS). The MIB
uses a hierarchical naming scheme. Each managed object in the MM200 is identified by
an Object Identifier (OID), a sequence of non-negative integers that uniquely describes
the path taken through the hierarchical structure.
2. Using the modem IP Address, perform a Walk of the MIB to retrieve all the MIB objects
managed in the MM200.