Technical information

MM200 High-Speed Microwave Modem User Interfaces
TM086 - Rev. 4.1 4-45
2. In the New Password Text Box, enter the new password (case sensitive, only *’s appear
for security).
3. Re-enter the new password to verify the desired setting.
4. Select OK
4.22 Logging Off
1. To log off the SNMP Configuration, press ‘14’ followed by <Enter>. The following
confirmation message will be displayed to avoid inadvertent exits:
You will be logged off. Are you sure? (Y/N):
4.23 Changing Your Authentication Password
1. To change your authentication password, you must be logged on in order for the
“SNMP/Security” selection to appear. Once logged on, proceed to the “SECURITY
CONTROLS” Menu Selections by pressing ‘12’, then ‘13’, followed by <Enter> to open the
Change Password Dialog.
+----------| Change Password |----------+
| |
| 1.Old Password : |
| 2.New Password : |
| 3.Re-enter New Password : |
| |
| 4.OK 5.CANCEL |
| |
+-----------------------------------------------+
2. In the Old Password Text Box, enter “Oper” (case sensitive).
3. In the New Password Text Box, enter the new password (case sensitive, only *’s appear
for security).
4. Re-enter the new password to verify desired setting.
5. Select OK
4.24 Changing Your Privacy Password
To change your privacy password, you must be logged on as either Oper-md5 or Oper-sha
(Operator). Once logged on, proceed to the “SECURITY CONTROLS” menu selections by
pressing 12. Press 14 followed by <Enter> to open the Change Password dialog.
+----------| Change Password |----------+
| |
| 1.Old Password : |
| 2.New Password : |
| 3.Re-enter New Password : |
| |
| 4.OK 5.CANCEL |
| |
+-----------------------------------------------+
1. In the Old Password Text Box, enter “Oper” (case sensitive).
2. In the New Password Text Box, enter the new password (case sensitive, only *’s appear
for security).