Technical information

User Interfaces MM200 High-Speed Microwave Modem
4-44 TM086 - Rev. 4.1
Security User Logon Password Authentication
Password
Privacy Password
Initial
Viewer Viewer Viewer
Oper–md5 Oper Oper Oper
Viewer–sha Viewer Viewer
Oper-sha Oper Oper Oper
Note: All entries are case sensitive
4.19 Exiting SNMP Configuration
1. Select the Main Menu by pressing ‘1’ followed by <Enter>, to go back to the MM200 top-
level menu screen.
4.20 Logging On
1. The user must be logged on to have access to SNMP Features. To log on the SNMP
configuration, press ‘13’ followed by <Enter> to open the Logon Dialog Box.
+------------------| Logon |------------------+
| |
| 1.User ID : |
| 2.Password : |
| |
| 3.OK 4.CANCEL |
| |
+-----------------------------------------------+
2. In the User ID Text Box, enter “Oper-md5” (case sensitive).
3. In the Password Text Box, enter “Oper” (case sensitive).
4. Select OK
4.21 Changing the Logon Password
To change the password, logged on so that the “SNMP/Security” selection appears. Once logged
on, proceed to the “SECURITY CONTROLS” Menu Selections by pressing ‘12’. Press ‘12’ again
followed by <Enter> to open the Change Password dialog.
+---------| Change Password |-----------+
| |
| 1.Old Password : |
| 2.New Password : |
| 3.Re-enter New Password : |
| |
| 4.OK 5.CANCEL |
| |
+-----------------------------------------------+
1. In the Old Password Text Box, enter “Oper” (case sensitive).