Technical information

User Interfaces MM200 High-Speed Microwave Modem
4-42 TM086 - Rev. 4.1
4.15 SNMP Option
1. From the Main Menu, select ‘20’ for Network Configuration. Verify that Selection 30,
SNMP Option is enabled. The MM200 SNMP Option is enabled at the factory if
purchased by the user. Please contact the Radyne Inc. Customer Service Department if
the SNMP feature is not available.
4.16 Network Configuration
4.17 Terminal Screens
1. The Network Configuration Screen is accessed from the MM200 Terminal top-level menu,
selection #20. There are two available setup screens: SNMP and Security. Once logged
on, the user can toggle back and forth using Selection Number 12, ‘SNMP/Security’.
SNMP Controls Screen:
1.Main Menu
2.Control Mode : TERMINAL 12.SNMP/Security
3.Term Emulate : VT 100 13.Logon
4.Term Baud : 9600 14.Logoff
SETUP STATUS
5.TrapType : VERSION2 Logon User : Oper-md5
6.PrimaryTrapHost : 192.168.0.25 Context Engine ID : 80000A1F01AC1264B0
7.SndaryTrapHost : 192.168.0.26 Engine Status : NORMAL
8.Trace Mode : LEVEL 5
9.Community : public
--------------------------------------------- SNMP CONTROLS ----------------------------------------
30.SNMP Option : ENABLE
31.Boot Mode : NONVOL
32.Modem EthAddr : 0010650D03E8
33.Modem IPAddr : 192.168.0.243
34.Server EthAddr : 000000000000
35.Server IPAddr : 192.168.0.50
37.Router IPAddr : 192.168.0.254
38.IPAddressMask : 255.255.0.0
Enter Selection Number: