Technical information

User Interfaces MM200 High-Speed Microwave Modem
4-4 TM086 - Rev. 4.1
4.2 Front Panel Control Screen Menus
The Front Panel Control Screen Menus are listed below. The MM200 Microwave Modem may be
operated in three different levels:
Level 0 - is for specialized factory configurations. Every screen is available including
those used for factory calibration and diagnostics.
Level 1 – includes those screens necessary for field maintenance.
Level 2 – is the default setting and is shipped from the factory in this mode. The screens
are available that provide the quickest form of setup and use.
Note: Screens Menus are listed below by level (L0, L1, and L2) and may be Read/Write
(RW) or Read Only (RO).
4.3 Level 2 Menu Screens
Level 2 menus screens allow for the quickest operation and system setup.
4.3.1 Main Menu Screens
Main Menu Screens (one of which is a Title Screen) are listed below:
MM-200 MODULATOR Title Screen:
Not a modifiable screen.
MODULATOR (menu):
DEMODULATOR (menu):
REPEATER (menu):
APC (menu):
TX INTERFACE (menu):
RX INTERFACE (menu):
MONITOR (menu):
ALARMS (menu):
SYSTEM (menu):
TEST (menu):