Operating instructions

User Interfaces DMD50 Universal Satellite Modem
4-38 TM118 – Rev. 1.1
Allows the user to adjust the internal frequency
reference for calibration. Only displayed if the system
reference clock source is HI STABILITY.
I OFFSET Used for factory test only.
Q OFFSET Used for factory test only.
IF RX LVL OFFSET Used for factory test only.
LB RX LVL OFFSET Used for factory test only.
POWER SOURCE Used for factory test only.
TERR INTFC BRD Indicates the Radyne assembly number for the
Terrestrial Interface Assembly.
CODEC BOARD (menu) Indicates the Radyne part number for the Codec Board.
TPC FPGA IMAGE Used for factory test only.
RS FPGA IMAGE Used for factory test only.
TPC CODEC IMAGE Used for factory test only.
FRONT PANEL BOARD Indicates the Radyne assembly number for the front
panel board.
FEATURES (menu)
5012.2840.2417 {____.____.____}
Allows the user to install purchased feature upgrades
(see Appendix A).
Contact the Radyne Customer Service Department or
Sales for hardware and software upgrades.
UPGRADE LIST (menu) The following identifies the available upgrade features:
10 MBPS, 20 MBPS, 52 MBPS (The highest option installed will hide the
lower rates.)
RXIF
RXLBAND
TXIF
TXLBAND
ENH ASYNC
IDR
SEQ