Operating instructions

DMD50 Universal Satellite Modem User Interfaces
TM118 – Rev. 1.1 4-31
T1E1 TERR CNTRL {STNDRD, FRC ON}
IBS TX PROMPT {STNDRD, FRC ON}
IBS TX SERVICE {STNDRD, FRC ON}
4.3.8 System Menu Options and Parameters
DATE (MM/DD/YY) Allows the user to enter the current date.
TIME {HH:MM:SS} Allows the user to enter the current time.
CONFIG COPY {Current, CFG1……CFG10}
Allows user to copy, save and recall modem
configurations.
FRONT PANEL (menu)
BKLT LEVEL {OFF, LOW, MED, HIGH}
Allows the user to enter the backlight intensity level.
BKLT TIMEOUT {00 - 99}
Allows the user to enter the length of time (in seconds)
of keyboard inactivity before the backlight shuts off. 00
= no timeout.
KEY CLICK {ON, OFF}
Allows the user to enable or disable the audible beep
each time a key is pressed. Illegal entries will still cause
a beep to be heard.
MENU NAVIGATION {STANDARD, FLOATING}
Standard: This setting has a fixed starting point for all
sub-menus.
Floating: Sub-menus are floating, always returning to
the last menu that was accessed.
LED TEST {ENTER}
Allows user to test all front panel LEDs.
REMOTE CONTROL {TERMINAL, COMPUTER}
Allows the user to select between terminal RS-232
control and remote port M&C RS-232/-485 control.
TERMINAL (menu)
TYPE {VT-100, WYSE50, VIEWPOINT}
Allows the user to select the emulation type.
BAUD RATE {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600}
Allows the user to enter the terminal baud rate.