Operating instructions

User Interfaces DMD50 Universal Satellite Modem
4-22 TM118 – Rev. 1.1
The status of the following ports may be one of the following:
Down: The link is down.
Unresolved: Unable to agree on connection speed.
10 Mbps Half: Connected at 10 Base-T Half Duplex.
10 Mbps Full: Connected at 10 Base-T Full Duplex.
100 Mbps Half: Connected at 100 Base-T Half Duplex.
100 Mbps Full: Connected at 100 Base-T Full Duplex.
Unused: The port is not available.
JS1 STATUS {See the note above}
Displays the current status of the LAN Port.
JS2 STATUS {See the note above}
Displays the current status of the LAN Port.
JS3 STATUS {See the note above}
Displays the current status of the LAN Port.
JS4 STATUS {See the note above}
Displays the current status of the LAN Port.
WAN STATUS {See the note above}
Displays the current status of the WAN Port.
VOLTAGES (menu)
+1.5V RX SUPPLY Displays the measured voltage of the 1.5 Volt Rx power
bus located inside the modem.
+1.5V TX SUPPLY Displays the measured voltage of the 1.5 Volt Tx power
bus located inside the modem.
+3.3V SUPPLY Displays the measured voltage of the +3.3 Volt power
bus located inside the modem.
+5V SUPPLY Displays the measured voltage of the +5 Volt power bus
located inside the modem.
+12V SUPPLY Displays the measured voltage of the +12 Volt power
bus located inside the modem.
+20V SUPPLY Displays the measured voltage of the +20 Volt power
bus located inside the modem.