Specifications

DMD20/20LBST Universal Satellite Modem User Interfaces
MN-DMD20-20LBST Revision 14 4–38
TCP/IP (menu)
BOOT MODE {DEFAULT, NON-VOL, BOOTP, IP TEST}
DEFAULT
: During initialization (boot up), the modem will restore the web setting
to the standard IP Mask and addresses supplied by the modem. The modem will
be taken off the network and will not be accessible. The Default settings are:
IP Address Mask: 255.000.000.000 (FF.00.00.00 hex)
Modem IP Address: 010.000.000.001 (C0.A8.00.EE hex)
Server IP Address: 010.001.001.001 (0A.01.01.01 hex)
Router IP Address: 010.000.001.001 (0A.00.01.01 hex)
BOOTP
: During initialization (boot up), the modem will get the
names, masks, and IP Addresses of the modem, router,
and server.
NON-VOL
: Stores and uses IP Mask and addresses as provided by
the user.
IP TEST
: Stores and uses IP Mask and addresses to fixed settings as listed
below.
Bootp Server Tag: 206
IP Address Mask: 255.255.255.000 (FF.FF.FF.00 hex)
Modem IP Address: 192.168.0.238 (C0.A8.00.EE)
Server IP Address: 192.168.000.101 (C0.A8.00.65)
Router IP Address: 192.168.000.102 (C0.A8.00.66)
BOOTp SERVER {128 – 257, default is 206}
Only used if Bootp is selected in Boot Mode. Should be
consistent with the tag expected by the users Bootp Server.
MODEM HOST The Host Modem for the network.
IP ADDR MASK {XXX.XXX.XXX.XXX} Hexidecimal Mask
{ddd.ddd.ddd.ddd} Decimal Mask
The IP Address Mask of the local network. The mask is
expressed in a hexadecimal format, and must be a valid TCP/IP
Mask. This field should be set before changes are made to the
Modem or Router Address.
MODEM IP ADDR {XXX.XXX.XXX.XXX} Hexidecimal Address
{ddd.ddd.ddd.ddd} Decimal Mask
The IP Address of the modem. This address should be
consistent for the mask defined. This address is expressed in
hexadecimal format. Broadcast and loop back addresses will not
be allowed. These are addresses with all subnet bits set to 0’s
or 1’s.