Specifications

DMD20/20LBST Universal Satellite Modem User Interfaces
MN-DMD20-20LBST Revision 14 4–14
AUPC MODE {DISABLE,NEAR SIDE, EFDATA}
Allows the user to enable or disable the AUPC Function of the
remote modem. The remote AUPC Function is the response of
the local modem to commands for an increase or decrease of
the Transmit Power in 0.5 dB steps and the command to change
to the setting indicated in the 'REMOTE CL ACTION' Menu of
the remote modem upon receiver loss of lock.
LOOPBACK {DISABLE, ENABLE}
Allows the user to enable or disable the Baseband Loopback
Test Mode of the remote modem.
TX 2047 TEST {DISABLE, ENABLE}
Allows the user to enable or disable the Transmit 2047 Pattern
Test Mode of the remote modem.
RX 2047 BER: Reports the BER measurement of the receiver 2047 Pattern Test
Mode of the remote modem. BER is reported from the 1x10
-5
to
1x10
-7
in tenth decade steps.
if the pattern does not synchronize or is out of range, ‘NO DATA’
will be displayed.
When modems are configured for Radyne AUPC, the remote Eb/No will be displayed in
the Monitor Menus.
IMPORTANT