Operating instructions

User Interfaces DMD20/DMD20 LBST Universal Satellite Modem
4-42 TM103 – Rev. 2.8
RD COMMUNITY {16 characters of name}
This menu is only displayed when SNMP VERSION is
set to V1 & V2.
This is the community that a host must be acting within
when an OID variable is requested by a V1/V2 SNMP
message.
RDWR COMMUNITY {16 characters of name}
This menu is only displayed when SNMP VERSION is
set to V1 & V2.
This is the community that a host must be acting within
when an OID variable is being changed by a V1/V2
SNMP message.
TRAP AGENT {XXX.XXX.XXX.XXX} Hexidecimal Mask
{ddd.ddd.ddd.ddd} Decimal Mask
IP address of the device receiveing SNMP Traps
FTP (menu)
PORT {XXXX}
Allows the user to select the desired port number.
Factroy default is set to 21. Port 21 is a reserved port
utilized by the File Transfer Protoco for FTP control
traffic.
USER ID Allows the user to enter the user identification for access
to an FTP session.
PASSWORD Allows the user to enter the password for access to an
FTP session.
WEB
CONFIRMATION {ENABLE, DISABLE}
USER 1
ACCESS GROUP {NO GROUP, GUEST, OPER, ADMIN}
Access rights represent the following:
No Group: Denies Access
Guest: Users are able to navigate most of the site, and
view modem parameter settings.
Oper: Users can monitor and control parameter settings,
and change their own authentication passwords.
Admin: At this highest access right, the users can
monitor and control the modems parameters, change
any user’s name and authentication password, and
modify IP network settings. Admin setting allows access
to the entire site.