Operating instructions

RCS20 M:N Redundancy Switch Appendix A
TM056 – Rev. 2.3 A-5
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<4>
<4>
Channels
Nonvolatile bytes
per Backup
Channel
Backup 1
(Channel 0)
Configuration
Backup 1
(Channel 0)
Backup Mode
Backup 1
(Channel 0)
Force Manual
Backup 1
(Channel 0)
Force Manual
Backup 2
(Channel 9)
Configuration
Backup 2
(Channel 9)
Backup Mode
Backup 2
(Channel 0)
Force Manual
Backup 2
(Channel 0)
Force Manual
Reserved
Reserved
4 for RCS20
0 = Backup modem
0 = Manual
1 = Automatic non-revertive
2 = Automatic revertive
Channel number for manual backup (1 to 9)
Modulator Backup (ignored if in automatic mode)
Channel number for manual backup (1 to 9)
Demodulator Backup (ignored if in automatic mode)
0 = Backup modem
1 = Preemptable prime modem
2 = Prime Modem
0 = Manual
1 = Automatic non-revertive
2 = Automatic revertive
Channel number for manual backup (1 to 8)
Modulator Backup (ignored if in automatic mode or if channel 9
is configured as prime)
Channel number for manual backup (1 to 8)
Demodulator Backup (ignored if in automatic mode or if channel
9 is configured as prime)
Reserved for RCS10 (= 0 for RCS20)
Reserved for RCS10 (= 0 for RCS20)
Status Bytes
<1>
<1>
<1>
Control Mode
Software
Revision
Number of
Channels
0 = Front Panel
1 = Terminal
2 = Remote Port (Computer RLLP)
Binary number, decimal point implied
Maximum number of prime and backup channels available to
the RCS20 switch. (10 decimal for RCS20).