Operating instructions

User Interfaces RCS20 M:N Redundancy Switch
4-8 TM056 - Rev. 2.3
4.5.1.4 Summary of Basic Front Panel Controls
Table 4-3 describes the functionality of the front panel keyboard in relation to front panel control.
Table 4-3.
ENTER Loads edited values into memory and advances to next screen in the menu tree.
CLEAR Aborts loading values into memory and advances to the previous screen in the
menu tree.
soft key
(‘NEXT’)
Aborts loading values into memory and advances to the next screen in the menu
tree.
soft key
(‘PREVIOUS’)
Aborts loading values into memory and advances to the previous screen in the
menu tree.
numeric keys Used to edit numeric parameters.
4.6 Front Panel Menu Trees and Screens
There are four menu trees used to control the RCS20: CONFIG SWITCH, CONFIG SYSTEM,
MONITOR/ALARMS, and TEST. These menu trees are shown in flowchart form in Figures 3-2 to 3-
5. Each block in a menu tree flowchart represents a data entry screen, and the arrowed lines
between the blocks represent movement between screens in response to front panel key presses.
Each menu tree diagram is accompanied by a set of figures detailing each data entry screen and
the result of key presses for that data entry screen. The CONFIG SWITCH screens are shown in
Figure 3-x through 3-x, the CONFIG SYSTEM screens are shown in Figures 3-x through 3-x, the
MONITOR/ALARMS screens are shown in Figures 3-x through 3-x, and the TEST screens are
shown in figures 3-x through 3-x. These screen figures are annotated with explanations of the
displayed parameters and details on editing the parameters for each screen.