Operating instructions

Appendix B RCS20 M:N Redundancy Switch
B-10 TM056 – Rev. 2.3
DESCRIPTION
"Common Alarm latched status:
A bit field. 0 = PASS, 1 = FAIL
Bit 0 = -12V alarm.
Bit 1 = +12V alarm.
Bit 2 = +5V alarm.
"
::= { radSNMP_Mod_Status 6 }
radRevisionNumber OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS current
DESCRIPTION
"Revision number of the modem firmware with an implied decimal point.
For example, a value of 23 means version number 2.3"
::= { radSNMP_Mod_Status 7 }
radPlus5Volts OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS current
DESCRIPTION
"+5V monitor with implied decimal point.
For example, a value of 51 represents +5.1 Volts."
::= { radSNMP_Mod_Status 8 }
radPlus12Volts OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS current
DESCRIPTION
"+12V monitor with implied decimal point.
For example, a value of 119 represents +11.9 Volts."
::= { radSNMP_Mod_Status 9 }
radMinus12Volts OBJECT-TYPE
SYNTAX INTEGER (-255..0)
ACCESS read-only
STATUS current
DESCRIPTION
"-12V monitor with implied decimal point.
For example, a value of -122 represents -12.2 Volts."
::= { radSNMP_Mod_Status 10 }
radTemperature OBJECT-TYPE
SYNTAX INTEGER (0..1000)
ACCESS read-only
STATUS current
DESCRIPTION
"Temperature monitor with implied decimal point.
For example, a value of 490 represents 49.0 C"
::= { radSNMP_Mod_Status 11 }
radFactoryConfiguration OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS optional
DESCRIPTION
"A bit field that shows the factory configuration options. 0=No, 1=Yes.
Bit 0 = Serial Interface Present