Operating instructions

DVB3030/DVB3030L Digital Video Broadcast Modulator User Interfaces
TM052 - Rev. 3.5 4-47
6. Example on how to query the DVB3030 modulator non-volatile status with an IP
address of 192.1.1.51 and a community name of "public":
snmpwalk 192.1.1.51 public.1.3.6.1.4.1.2591.1.1
Response:
enterprises.2591. 1. 1. 1.0 = 1 (Carrier Control = ON)
enterprises.2591.1.1.2.0 = -56 (Transmit Power = -5.6 dBm)
enterprises.2591.1.1.3.0 = 75000000 (IF Frequency = 75000000 MHz)
enterprises.2591.1.1.4.0 = 2831060 (Data Rate = 2831060 bps)
enterprises.2591.1.1.5.0 = 2048000 (Symbol Rate = 2048000 bps)
enterprises.2591.1.1.6.0 = 0 (Symbol Rate Mode = VARIABLE)
enterprises.2591.1.1.7.0 = 8 (Strap Code = 8)
enterprises.2591.1.1.8.0 = 3 (Convolutional Encoder = VIT3/4)
enterprises.2591.1.1.9.0 = 0 (Clock Control = SCTE)
enterprises.259 1. 1. 1.1 0.0 = 0 (Framing Mode = 188 Byte)
enterprises.2591.1.1.1 1.0 = 0 (Rolloff=0.35)
enterprises.2591.1.1.12.0 = 0 (Frequency Reference Source =
INTERNAL)
enterprises.2591.1.1.13.0 = 1024000 (External Reference = 1024000 Hz)
enterprises.2591.1.1.14.0 = 0 (Interface Type = SERIAL)
enterprises.2591.1.1.15.0 = 0 (Clock Polarity = NORMAL)
enterprises.2591.1.1.16.0 = 0 (Data Polarity = NORMAL)
enterprises.2591.1.1.17.0 = 0 (Spectrum = NORMAL)
enterprises.2591.1.1.18.0 = 0 (Modulation Type = QPSK)
enterprises.2591.1.1.19.0 = 0 (Framing = DVB)
enterprises.2591.1.1.20.0 = 1 (Reed-Solomon = ENABLE)
enterprises.2591.1.1.21.0 = 1 (Scrambler Control = ENABLE)
enterprises.2591.1.1.22.0 = 0 (Scrambler Type = DVB)
enterprises.2591.1.1.23.0 = 0 (Differential Encoder = OFF)
enterprises.2591.1.1.24.0 = 1 (Alarm Mask Enable = ENABLE)
enterprises.2591.1.1.25.0 = 255 (Major Alarm Mask = NONE MASKED)
enterprises.2591.1.1.26.0 = 255 (Minor Alarm Mask = NONE MASKED)
enterprises.2591.1.1.27.0 = 255 (Common Alarm Mask = NONE
MASKED)
enterprises.2591.1.1.28.0 = 0 (Operating Mode = NORMAL)
enterprises.2591.1.1.29.0 = 0 (Carrier Test = OFF)
enterprises.2591.1.1.30.0 = "" (Circuit ID = ““)
enterprises.2591.1.1.31.0 = 0 (Control Mode = LOCAL)
Note: snmpwalk communicates with a host using SNMP GET Next Requests.
7. Example on how to query the DVB3030 modulator volatile status with an IP
Address of 192.1.1.51 and a community name of ‘public’.
snmpwalk 192.1.1.51 public.1.3.6.1.4.1.2591.1.2
Response:
enterprises.2591.1.2. 1.0 = 0 (Major Alarm Status)
enterprises.2591.1.2.2.0 = 46 (Minor Alarm Status)
enterprises.2591.1.2.3.0 = 0 (Common Alarm Status)
enterprises.2591.1.2.4.0 = 2 (Latched Major Alarm Status)
enterprises.2591.1.2.5.0 = 46 (Latched Minor Alarm Status)
enterprises.2591.1.2.6.0 = 0 (Latched Common Alarm Status)