Operating instructions

User Interfaces DVB3030/DVB3030L Digital Video Broadcast Modulator
4-42 TM052 - Rev. 3.5
Main Menu
1. Controls
2. Modulator Controls
3. Event Buffer
8. Ethernet Configuration
Radyne ComStream Corp.
DVB3030 Digital Video Modulator
Enter Selection Number:
MODEM ALARMS MASK STATUS
1. Main Menu 11. Loss Terr Clock: Fail NO Software Release = 2.4
2. Control Mode : Terminal 12. Loss Terr Data: Pass NO Temperature (c) = 33.3
13. Loss DVB Frame: Pass NO +5 V Monitor = +5.0
14. Loss Frame Cnt: Pass NO +12 V Monitor = +12.2
15. FIFO Error: Pass NO -12 V Monitor = -12.0
16. Loss Int Clock: Pass NO
------------------------------------------- ETHERNET CONFIGURATION -----------------------------------------
-
31. SNMP Mode: Normal 43. Community: Public
32. ModemEtherAddr: 00106507340D 44. BootMode: Nonvol
33. ModemIPAddr: 192.168.0.20
34. ServerEthAddr: 006097107878
35. ServerIPAddr: 192.168.0.1
36. ServerHostName: tcphost
37. RouterIpAddr: 192.168.0.254
38. IPAddrMask: 255.255.255.0
Enter Selection Number:
4.4.2.3 SNMP Setup
The following setup will require the use of a computer with HyperTerminal or Procomm Terminal
Emulation Software (or Dumb Terminal).
4.4.2.4 Connecting the Terminal
Connect the computer to the DVB3030 Terminal Connector (J10) on the rear of the unit using an
RS-232 cable.