Operating instructions

DVB3030/DVB3030L Digital Video Broadcast Modulator User Interfaces
TM052 - Rev. 3.5 4-31
<1>
<1>
<1>
<4>
<1>
<1>
<1>
Minor Alarm Mask
Common Fault Mask
Symbol Rate Mode
Symbol Rate
Framing Mode
Roll Off
Control Mode
Bit 2 = Composite clock PLL lock
Bit 3 = IF synthesizer PLL lock
Bit 4 = External reference PLL lock
Bit 5 = Frame synchronizer Xilinx config error
Bit 6 = Frame interleaver Xilinx config error
Bit 7 = Mod Map Xilinx config error
Bit 0 = Loss Internal Clock
Bit 1 = Loss Terrestrial Clock
Bit 2 = Loss Terrestrial Data
Bit 3 = Reed-Solomon FIFO empty
Bit 4 = Interleaver frame count error
Bit 5 = DVB frame synchronization error
Bit 6 = Event buffer not empty)
Bit 0 = -12V alarm. 1 = Fail
Bit 1 = +12V alarm. 1 = Fail
Bit 2 = +5V alarm. 1 = Fail
Bit 3 = Temperature. 1 = Fail
Bit 4 = RAM and ROM alarm flag
Bits 5 - 7 = Spares
0 = Variable, 1 = Fixed
Symbol Rate in bps
0 = 188 Byte, 1 = 204 Byte, 2 = No Framing
0 = 0.35, 1 = 0.2
0 = Local, 1 = Terminal, 2 = Computer, 3 = Ethernet
Status Bytes
<1>
<1>
<1>
<1>
<1>
Control Mode
Revision Number
Mod Fault Status
Major Alarm
Minor Alarm
0 = Local, 1 = Terminal, 2 = Computer, 3 = Ethernet
Decimal point implied
TBD
Bit 0 = Transmit output power level
Bit 1 = Transmit oversample PLL lock
Bit 2 = Composite clock PLL lock
Bit 3 = IF synthesizer PLL lock
Bit 4 = External reference PLL lock
Bit 5 = Frame synchronizer Xilinx config error
Bit 6 = Frame interleaver Xilinx config error
Bit 7 = Mod Map Xilinx config error
Bit 0 = Loss Internal Clock
Bit 1 = Loss Terrestrial Clock
Bit 2 = Loss Terrestrial Data
Bit 3 = Reed-Solomon FIFO empty
Bit 4 = Interleaver frame count error
Bit 5 = DVB frame synchronization error
Bit 6 = Event buffer not empty