Operating instructions

Latest Software Revision Confirmation
When new features are added to Radyne ComStream Corp. equipment,
the control parameters are appended to the end of the Non-Volatile
Section of the Remote Communications Specification, and status of
the features, if any, are added at the end of the Volatile Section. If a
remote M&C queries two pieces of Radyne ComStream Corp.
equipment with different revision software, they could respond with
two different sized packets. The remote M&C MUST make use of the
non-volatile count value to index to the start of the Volatile Section. If
the remote M&C is not aware of the newly added features to the
product, it should disregard the parameters at the end of the Non-
Volatile Section and index to the start of the Volatile Section.
Before creating any software based on the information contained in
this document, contact the Radyne ComStream Corp. Customer
Service Department (602-437-9620) to find out if the software revision
for that piece of equipment is current and that no new features have
been added since the release of this document.