User's Manual

RADWIN 1000/2000 User Manual Version 2.12 H-1
Appendix H
Combo Configuration
Tool
What is the Combo Configuration Tool?
The RADWIN 1000/2000 is supplied preconfigured to a default frequency
band and regulation. The user may however, reconfigure it to use any one
of the supported frequency bands shown in the following example:
The Combo Configuration Tool is a software utility supplied by RADWIN to
change the link frequency band. It runs as familiar Windows Wizard.
This appendix will walk you through the Wizard. It also provides help for
common problems encountered during the configuration.
Who may use the Combo Configuration Tool
The Combo Configuration Tool is a password protected utility intended for
the use of RADWIN accredited personnel at the user’s site, RADWIN Cus-
tomer Support Engineers or Professional Installers conversant with FCC
requirements.
Caveat to the use of the Combo Configuration Tool
It is the user’s responsibility to operate the system according to local regula-
tions and to acquire the relevant permits or licenses for the frequency band
selected, if applicable.
Prerequisites to using the Combo Configuration Tool
To use the Tool, you need a PC running Windows 2000 or Windows XP Pro
to be connected to the RADWIN 1000/2000 link.
Product Default Band
2050 FCC/IC 5.8 GHz