User's Manual Part 2
Table Of Contents
- Chapter 6
- Site Configuration
- Configuring the Site
- Viewing Air Interface Details
- Changing the Transmit Power
- Site Management: IP Address and VLAN
- Setting the Date and Time
- Ethernet Properties
- Displaying the Inventory
- Security Features
- Muting the alignment tone
- Setting External Alarm Inputs
- Managing Configuration Files
- Configuration with Telnet
- Site Configuration
- Chapter 7
- Appendix A
- Appendix B
- Appendix C
- Appendix D
- Appendix E
- Appendix F
- Appendix G
- Appendix H
- Appendix I
- Combo Configuration Tool
- What is the Combo Configuration Tool?
- Who may use the Combo Configuration Tool
- Caveat to the use of the Combo Configuration Tool
- Prerequisites to using the Combo Configuration Tool
- Operating the Combo Configuration Tool
- Before using the Combo Configuration Tool
- Using the Combo Configuration Tool
- If you receive an error message
- Combo Configuration Tool
- Appendix J
- Index
Radio Appendix A
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1 A-2
Frequency Bands
Band Regulations
5.725 – 5.850 GHz FCC / IC
5.725 – 5.825 GHz FCC(UNII)/IC
5.250 – 5.350 GHz (exclud-
ing 40 MHz channel band-
width and 6dBi antenna
assembly gain)
FCC
5.250 – 5.350 GHz (including
40 MHz channel bandwidth
and 6dBi antenna assembly
gain)
IC
5.470 – 5.725 GHz (exclud-
ing 40 MHz channel band-
width and 6dBi antenna
assembly gain)
FCC
5.470 – 5.725 GHz (including
40 MHz channel bandwidth
and 6dBi antenna assembly
gain)
IC
4.940 – 4.990 GHz
FCC2.400 – 2.4835 GHz
3.650 – 3.700 GHz
3.475 – 3.650 GHz IC
Band Max Tx Power Antenna
5.725 – 5.850 GHz
29.95 dBm 28 dBi Dish
29.95 dBm 24 dBi Integral Flat
29.95 dBm 23 dBi External Flat
23 dBm 14 dBi External Flat
20 dBm 16.5 dBi External Flat
28 dBm 8 dBi assembly