User's Manual Part 2

RADWIN 2000 User Manual Release 2.5.40 A-1
Appendix A
Technical Specifications
Scope of these Specifications
This appendix contains technical specifications for the major link components appearing in
this User Manual. They are correct at the date of publication, but are intended for general
background only. The latest authoritative and most up to date technical specifications are
available as Data Sheets obtainable from RADWIN Customer Service.
In any event, RADWIN reserves the right to change these specifications without notice.
ODU
Capacity
• RADWIN 2000 C: Up to 16 E1/T1 services and up to 100 Mbps capacity
(net throughput, full duplex)
• RADWIN 2000 X: Up to 3 E1 or 4 T1 services up to 10Mbps capacity (net
throughput , full duplex)
• RADWIN 2000 L: Up to 50 Mbps capacity (net throughput, full duplex)
• RADWIN 2000 PDH: Up to 16 E1/T1 services and up to 10 Mbps capacity
(net throughput, full duplex. Requires an IDU-C or E, no PoE support
Range Up to 120 km / 75 miles
Radio Modulation 2x2 MIMO-OFDM (BPSK/QPSK/16QAM/64QAM)
Adaptive Modulation & Coding Supported
Automatic Channel Selection Supported
Diversity Supported
Spectrum View Supported
Duplex Technology TDD
Error Correction FEC k = 1/2, 2/3, 3/4, 5/6
Rate – Dual Antenna [Mbps] 13 26 39 52 78 104 117 130
Rate – Single Antenna [Mbps] 6.5 13 19.5 26 39 52 58.5 65
Modulation BPSK QPSK 16QAM 64QAM
FEC [k=] 1/2 1/2 3/4 1/2 3/4 2/3 3/4 5/6
Max Tx Power [dBm] for 4.8 – 6 GHz 25 24 21 19 18
Max Tx Power [dBm] for 2.4 GHz 26 25 24 24 21 20
Max Tx Power [dBm] for 2.5 GHz (BRS) See Table 24-3