User's Manual Part 1

Installation Chapter 5
RADWIN 2000 User Manual Release 2.5.40 5-6
Figure 5-4: Change Link Password dialog box
2. Enter the current link password (The default link password for a new ODU is wire-
less-bridge
).
If you have forgotten the Link Password, click the Forgotten Link Password button.
The following window is displayed:
Figure 5-5: Lost or forgotten Link Password recovery
Follow the instructions to use the Alternative Link Password, and click OK to finish.
You are returned to the window in Figure 5-4 above. Continue with the next step.
3. Enter a new password.
4. Retype the new password in the Confirm field.
5. Click OK.
6. Click Yes when asked if you want to change the link password.
7. Click OK at the
Password changed success message.
Note
• A link password must contain at least eight but no more than 16
characters excluding SPACE, TAB, and any of “>#@|*?;.”
• Restoring Factory Defaults returns the Link Password to
wireless-
bridge
.
• If the link is inactive, then the link password may also be changed
from the Site Configuration dialogs. See page 8-13.