User's Manual Part 1

Enable / Disable Telnet Access Chapter 8
RADWIN 2000 User Manual Release 2.5.40 8-8
During the first two minutes of connection, the ODU uses management packets both with and
without VLAN. You may use this period to reconfigure the VLAN ID and priority.
Enable / Disable Telnet Access
For a link managed in a network, direct access to an ODU using Telnet is considered to be a
security breach. Telnet access may be enabled or disabled by clicking the Protocol tab and
enabling/disabling Telnet access using the Telnet check-box:
Figure 8-7: Enable/Disable Telnet Access
Displaying the Inventory

To view the inventory data
1. Choose a site from the main menu.
The Configuration dialog box opens.
2. Choose Inventory.
Figure 8-8: Inventory window