User's Manual Part 1

Viewing System Details Chapter 8
RADWIN 2000 User Manual Release 2.5.40 8-3
 To edit the Configuration Parameters:
1. Click the required site button on the main tool bar of the RADWIN Manager
OR
Click Configuration from the main menu and choose a site to configure.
The Configuration dialog box opens (see Figure 8-1 above).
2. Choose the appropriate item in the left hand list to open a dialog box.
3. Click Apply to save changes.
In subsequent instructions, we will simply say “Choose a site to configure” on the under-
standing that the foregoing procedure is implied.
Viewing System Details
This is the first window displayed - as depicted above. You can edit the contact details and
site names.
Viewing Air Interface Details
Click the Air Interface item in the left hand list. A window similar to the following appears:
Figure 8-2: Air interface details
Changing the Transmit Power
Each site can have a different Tx Power level.
Buzzer
Mutes the alignment tone in installation mode. Reactivate the
beeper during alignment.