User's Manual Part 1

Configuration Chapter 7
RADWIN 2000 User Manual Release 2.5.40 7-8
The Channel Bandwidth may also be changed. The available choices are 10, 20 and 40MHz
depending on regulation (see Appendix A).
When you have completed making your choice, click Next to continue.
Step 4, Tx Power and Antenna Settings
The Tx Power and Antenna Settings window is similar to that for Installation:
Figure 7-8: Transmission Power and Antenna Parameters
As in Installation mode, you need to consider three items:
• Number of antennas at each Link site (1 or 2)
• Tx Power setting for each one
• MIMO or Diversity mode
Changing Number of Antennas and Tx Power
TX Power, Antenna Gain and Cable Loss
If you chose to configure either antenna, you are presented with the following window: