User's Manual Part 1

Installation Chapter 5
RADWIN 2000 User Manual Release 2.5.40 5-28
Figure 5-30: TDM Parameters Configuration (2)
3. Click the required parameter. Their meanings are as follows:
Figure 5-31: TDM Parameters
Transparent/Transparent
The clock at Site A regenerates the clock from Site B and
vice versa.
Loop time/Recover
The Site A port receive-clock is used as the transmit-clock
for that port on both sides of the link.
Recover/Loop time
The Site B port receive-clock is used as the transmit-clock
for that port on both sides of the link.
Internal/Recover
Note
Please keep in mind that what follows is per port .