Reference Guide

Overview
The NEO, NEO DUO is a single or dual carrier base station radio device. It encapsulates two
5.x GHz radio modules as well as independent beamforming antenna for each individual
radio. The unit is designed to deliver up to 2 x 1500Mbps. It supports 10, 20, 40 80 MHz
channel bandwidths in the frequency range 5150 – 5250 MHz*, 5725 - 5850 MHz. It is using
OFDM transmission technique in TDD Duplexing method.
The modulation supported is BPSK, QPSK, 16QAM, 64QAM, 256QAM OFDM
The NEO incorporates a beamforming antenna coupled with a radio with software capability
to toggle between wide and narrow operating modes.
The NEO DUO incorporates an independent beamforming antenna for each radio with
software capability to toggle between wide and narrow beamwidths operating modes.
The NEO, NEO DUO is powered by a PoE device and has a LAN port option. The NEO, NEO
is certified under the identification numbers FCC ID: Q3K-NEO5X and IC: 5100A-NEO5X.
* Only supported under FCC Rules
Condition of Use
The NEO, NEO DUO is a proprietary radio device and can only be deployed and maintained
by RADWIN professional installers or its authorized subcontractors
FCC Rules and ISED Regulation Restrictions
The ODU firmware is factory programmed to operate under the FCC rules and ISED
regulation restrictions. The firmware is locked and inaccessible by any third party. As a
result of the above the user interface allows both the installer and the user to control the
ODU only within the boundaries of the regional restrictions.
Antenna
The NEO, NEO DUO is certified with a beamforming crossed dual pole antenna type. The
antenna is capable to operate in two modes configurable by software: wide angle (90deg)
and narrow angle (30deg).
NEO, NEO DUO Reference Guide 1