Installation Guide

RADWIN5000InstallationGuide DQ0266610/A.01 2‐43
JETDUOandJETAIR/PROUnits InstallationSteps
IDU‐H
TheIDU‐HdoesnotsupporttheDUOradio.
TheIDU‐HisanaggregationswitchwiththefunctionalityofsixPoEdevices.Itisideal foruse
atabasestationhavingseveralcollocatedradios.
Figure2‐51:IDU‐H
TheIDU‐Hhasthefollowingconnections:
• SFPports
• LANports:Ethernet,supportingGbE.
• ODU/PoEports:FunctionidenticallytotheLAN‐OutportonaPoEdevice.
• DCInputs
• Groundinglug
• LEDcolors:Green=link/activity,Yellow=Duplex/two‐waycommunication
InstallingtheIDU‐H:
• TheIDU‐Hcansitonatabletop,butisbestinstalledinarack.
• Connecttheradio’sinputporttoanyofthesixODU/PoEports.
• UseeitherofthetwoLANportsasanetworkconnection.
• TheIDU‐Hhasredundantpowerconnectioncircuits.Aviewofthepowerconnectorsis
shownbelow.Inthiscase,onlytheprimarycircuithasapowerconnector:
UseonlyasafetyapprovedPoEaccordingtoIEC/EN/UL60950‐1or
62368‐1withratedoutputvoltageof24‐56VDCandratedcurrentof1A
max
SFPports
LANports
ODU/PoE
ports
DCinputs
GND