User's Manual

WinLink1000 Installation and Operation Manual Chapter 4 Configuration
Note
By clicking Reselect Channel, the ODU starts scanning all the channels
from the available channels list and looks for radio frequency activity in
each of the channels. It tries to select the optimal pure channel. If
another channel is required, the operating channel that the ODU finds
most pure must be removed from the available channel list.
3. Click Next.
The Rate Select box appears.
WinLink1000 5.4 GHz ETSI Version
In accordance with ETSI, unlicensed wireless data equipment is not
allowed to interrupt radar services. Therefore, if WinLink1000 detects
Radar interference it automatically changes the frequency channel. This
feature is termed Dynamic Frequency Selection (DFS). According to the
standard, a channel with active Radar is prohibited from use for 30
minutes. Before any transmission, WinLink1000 probes a channel for
Radar signals for a period of 60 seconds.
In the 5.4 GHz ETSI version, the Automatic Channel Selection is
selected by default and a minimum of two channels must be defined as
available.
Selecting Channels 4-7