User's Manual

WinLink 1000 Installation and Operation Manual Chapter 1 Introduction
Physical Description 1-7
Temperature
-5°C to 45°C/23°F to 113°F
Humidity Up to 90%, non-condensing
(*) Specification is different per product, for further details refer to the Link Budget
Calculator
(**) Specification is different per ordering option
Antenna Characteristics (***)
Band (GHz)
2.312-
2.387
2.400-
2.483
4.940-
4.990
5.250-
5.330
5.470-
5.725
5.725-
5.850
Integrated Antenna 1 ft
Gain 16dBi 17dBi 22dBi 22dBi 22dBi
Beam width
20° 20°
N/A
9° 9° 9°
Polarization Linear Linear Linear Linear Linear
External antenna 1 ft
Gain 21 dBi 22 dBi 22 dBi 22 dBi
Beam width N/A N/A
9° 9° 9° 9°
Polarization Linear Linear Linear Linear
External Antenna 2 ft
Gain 24dBi 24dBi 27 dBi 28dBi 28dBi 28dBi
Beam width
8° 8° 8° 4.5° 4.5° 4.5°
Polarization Linear Linear Linear Linear Linear Linear
External Antenna 3 ft
Gain 32.5 dBi
Beam width N/A N/A N/A N/A N/A
4.5°
Polarization Linear
(***) IC related:
1. This device has been designed to operate with an antenna having a maximum
gain of 28dBi. Antenna having a higher gain is strictly prohibited per
regulations of industry Canada. The required antenna impedance is 50Ω.
2. Operation is subject to the following 2 conditions:
a. This device may not cause interference.
b. This device must accept any interference, including interference that may
cause undesired operation of the device.