User's Manual

WinLink User and Installation Guide Version 1.770 K-188
Name
ID
Severity
Description
transmittingOnChannel 14 normal Indicates that the ODU is transmitting on channel. Contains a single
parameter, which is its description: 1 - Description: Transmitting on
channel %n GHz. %n Is the channel frequency in GHz.
scanningChannels 15 normal Indicates that the ODU is scanning channels. Contains a single
parameter, which is its description: 1 - Description: Channel scanning in
progress.
incompatiblePartner 16 critical Indicates that configuration problem was detected and that link
installation is required in order to fix it. Contains a single parameter,
which is its description: 1 - Description: Configuration problem
detected. Link installation required.
timeClockSet 17 normal Indicates that the ODU time clock was set. Contains a single
parameter, which is its description: 1 - Description: The time was set to:
%p. %p Is the date and time.
configurationChanged 18 normal Indicates that the ODU was recovered from an error, but there are
configuration changes. Contains two parameters: 1 - Description:
Configuration changed. Error code is: %n. 2 - %n number.
hssOpStateChangedToINU 19 normal Indicates that the HSS operating state was changed to INU type.
Contains a single parameter, which is its description: 1 - Description:
HSS operating state was changed to: INU.
hssOpStateChangedToHSM 20 normal Indicates that the HSS operating state was changed to HSM type.
Contains a single parameter, which is its description: 1 - Description:
HSS operating state was changed to: HSM.
hssOpStateChangedToHSC 21 normal Indicates that the HSS operating state was changed to HSC type.
Contains a single parameter, which is its description: 1 - Description:
HSS operating state was changed to: HSC_DT/HSC_CT.
vlanModeActive 22 normal Indicates to non-VLAN PC that after 2 minutes the system will support
only VLAN tag on management interface. Contains a single parameter,
which is its description: 1 - Description: VLAN Mode is active. Non-
VLAN traffic will be blocked in 2 minutes.
tdmServiceAlarm 100 major Indicates that TDM Service is in alarm state. Contains a single
parameter, which is its description: 1 - Description: TDM Service -
Alarm.
ethServiceClosed 101 major Indicates that Ethernet Service is closed. Contains a single parameter,
which is its description: 1 - Description: Ethernet Service is closed.
ethServiceNotPermitted 102 major Indicates that Ethernet Service is not permitted. Contains a single
parameter, which is its description: 1 - Description: A valid Idu could not
be detected at %s. Please check your configuration. %s - Is the Local
Site name or Remote Site name or both sides of the Link.
encryptionAlarm 103 major Indicates an encryption key mismatch. Contains a single parameter
which is its description: 1 - Description: Encryption Status - Failed. No
Services are available.
changeLinkPasswordAlarm 104 major Indicates that a failure has occurred while attempting to change the
Link Password. Contains a single parameter which is its description: 1 -
Description: Failed to change the Link Password at/on: %s. %s - Is the
Local Site name or Remote Site name or both sides of the Link.
externalAlarmInPort1Alarm 105 major The trap is sent every time an alarm occurs in the External Alarm Input
of port #1. Contains a single parameter which is its description: 1 -
Description: External Alarm 1 - <User Text> - Alarm.
externalAlarmInPort2Alarm 106 major The trap is sent every time an alarm occurs in the External Alarm Input
of port #2. Contains a single parameter which is its description: 1 -
Description: External Alarm 2 - <User Text> - Alarm.