User's Manual

WinLink User and Installation Guide Version 1.770 K-186
Name
OID
Type
Access
Description
winlink1000IduTdmJitterBufferSizeEval
1.3.6.1.4.1.4458.1000.2.6.17 Integer RW
TDM Jitter Buffer Size for evaluation. The value
must be between the minimum and the maximum
TDM Jitter Buffer Size. The units are 0.1 x
millisecond.
winlink1000GeneralTrapDescription
1.3.6.1.4.1.4458.1000.100.1 DisplayString RO Trap's Description. Used for Trap variables.
winlink1000GeneralTrapSeverity
1.3.6.1.4.1.4458.1000.100.2 Integer RO Trap's Severity. Used for Trap variables.
winlink1000GeneralCookie
1.3.6.1.4.1.4458.1000.100.3 DisplayString RW
MIB Traps
General
Each of the link's ODU’s can be configured with up to 10 different trap
destinations. When the link is operational, each ODU issue traps from
both ODU’s. The trap source IP address is the sending ODU. Each trap
contains at the very least, a parameter with a description of the event.
The trap originator can be identified by the trap community string or
the local or remote notation at the end of the trap description text
(first parameter). The
"public-bru1" is used for local ODU traps while
the
"public-bru4097" is used for remote ODU traps. Additional trap
data is stored in the trap comment in the MIB. The data includes the
recommended trap severity (for alarms only), clear data and
parameters to display. The following table details all the WinLink™
1000 traps.