User's Manual

WinLink User and Installation Guide Version 1.770 K-185
Name
OID
Type
Access
Description
winlink1000IduTdmCurrentTable
N/A
IDU TDM Links Statistics Table.
winlink1000IduTdmCurrentEntry
N/A
Table entry. INDEX {
winlink1000IduTdmCurrentIndex }
winlink1000IduTdmCurrentIndex
RO Table index (Same as
winlink1000IduTdmLineIndex).
winlink1000IduTdmCurrentBlocks
1.3.6.1.4.1.4458.1000.2.6.7.1.101 Counter RO Number of correct blocks transmitted to the line.
winlink1000IduTdmCurrentDrops
1.3.6.1.4.1.4458.1000.2.6.7.1.102 Counter RO Number of error blocks transmitted to the line.
winlink1000IduTdmRemoteQual
1.3.6.1.4.1.4458.1000.2.6.8 Integer RO Estimated average interval between error second
events. The valid values are 1-2^31 where a value
of -1 is used to indicate an undefined state.
winlink1000IduTdmRemoteQualEval
1.3.6.1.4.1.4458.1000.2.6.9 Integer RO Estimated average interval between error second
events during evaluation process. The valid
values are 1-2^31 where a value of -1 is used to
indicate an undefined state.
winlink1000IduTdmSrvEval
1.3.6.1.4.1.4458.1000.2.6.10 Integer RW
Evaluated TDM service bit mask.Setting this
parameter to value that is bigger than the
activated TDM service bit mask will execute the
evaluation process for 30 seconds. Setting this
parameter to 0 will stop the evaluation process
immediately.
winlink1000IduTdmBackupAvailableLink
s
1.3.6.1.4.1.4458.1000.2.6.11 Integer RO The number of TDM backup trunks.
winlink1000IduTdmBackupTable
N/A
IDU TDM Links Statistics Table.
winlink1000IduTdmBackupEntry
N/A
Table entry. INDEX {
winlink1000IduTdmBackupIndex }
winlink1000IduTdmBackupIndex
1.3.6.1.4.1.4458.1000.2.6.12.1.1 Integer RO Table index.
winlink1000IduTdmBackupMode
1.3.6.1.4.1.4458.1000.2.6.12.1.2 Integer RW
TDM backup mode: Enable or Disable
winlink1000IduTdmBackupCurrentActive
Link
1.3.6.1.4.1.4458.1000.2.6.12.1.3 Integer RO TDM backup current active link: N/A
winlink1000IduTdmJitterBufferSize
1.3.6.1.4.1.4458.1000.2.6.13 Integer RW
TDM Jitter Buffer Size. The value must be
between the minimum and the maximum TDM
Jitter Buffer Size. The units are 0.1 x millisecond.
winlink1000IduTdmJitterBufferDefaultSiz
e
1.3.6.1.4.1.4458.1000.2.6.14 Integer RO TDM Jitter Buffer Default Size. The units are 0.1 x
millisecond.
winlink1000IduTdmJitterBufferMinSize
1.3.6.1.4.1.4458.1000.2.6.15 Integer RO TDM Jitter Buffer Minimum Size. The units are 0.1
x millisecond.
winlink1000IduTdmJitterBufferMaxSize
1.3.6.1.4.1.4458.1000.2.6.16 Integer RO TDM Jitter Buffer Maximum Size. The units are
0.1 x millisecond.