User's Manual

Appendix F
BRS Installation
Procedure
BRS Link Activation
In accordance with 2.5 GHz standard, WinLink-BRS systems links must be activated
before use. This is done at both ODUs independently before installation on site. Both
ODUs must be configured the same.
To Activate a BRS Link
1. Install WinLink Manager software as usual.
2. When the Manager Main Screen is displayed it appears with the
Link Status label red and showing Inactive. The Link Configuration
and Link installation buttons are disabled.
Figure F-1: Inactive Manager Screen
3. Click Configuration>Configure Location
The Air Interface dialog box opens: