User's Manual

Appendix C
AIND Alignment
Use this procedure when using the all indoor system WinLink-ANID or
manually aligning two WinLink units.
To achieve the best benefit and link budget from the WinLink™ 1000
installation, the link antennas must be aligned; the two antennas
should exactly face each other.
In order to achieve the best performance, the line of sight must be as
clear as possible with no obstructions between the two sites.
Prior to attempting alignment, install the hardware and software in
accordance with the WinLink Installation and Operation Manual. The
figure below shows the link setup. At least two people are needed to
perform the alignment procedures.
Once the alignment is complete, you are able to evaluate the quality of
the link.
Site A
Site B
AirMux
IDUx
IDUx
Figure C-1: WinLink Link Setup