User's Manual Part 2

Appendix G BRS Installation Procedure Installation and Operation Manual
Figure G-3. BRS Channel Settings Pre-Transition
8. Perform the remainder of the Installation procedure as defined in
the Installation section.
G.2 BRS Link Configuration
The BRS link is reconfigured during the Link Installation or the Link
Configuration wizards, or from the Air Interface screen.
Note
Both sites in a BRS Link must be configured identically.
Any changes to the frequency settings cause the link to re-
synchronize. A short loss of servi e will occur during re-
synchronization.
c
G-4 BRS Link Configuration WinLink 1000