User's Manual Part 2

Appendix G
BRS Installation Procedure
G.1 BRS Link Activation
In accordance with 2.5 GHz standard, WinLink 1000-BRS systems links
must be activated before use. This is done at both ODUs independently
before installation on site. Both ODUs must be configured the same.
Æ
To Activate a BRS Link
1. Install WinLink 1000 Manager software as usual.
2. When the Manager Main Screen is displayed it appears with the Link
Status label red and showing Inactive. The Link Configuration and
Link installation buttons are disabled.
WinLink 1000 BRS Link Activation G-1