User's Manual Part 2

Appendix F Hub Site Synchronization Installation and Operation Manual
The Hub Site Configuration dialog box with the current status of
the ODUs is displayed.
3. Select the type of unit configuration from the drop-down list.
Because only the relevant options are displayed according to the
hardware configuration of each unit, usually the remote site will
have only the Independent Unit option available.
4. Select the appropriate RFP radio button. Some RFP options may be
disabled depending on the BW previously selected.
Note
Take care to avoid incorrect configuration of bandwidth, RFP or to set
multiple Hub Sync Masters, as system interference can occur. WinLink
1000 gives error messages and tool tips if the system is configured
with mismatches.
Figure F-6. Hub Site Configuration dialog box
F-8 HSS Link Configuration WinLink 1000