User's Manual Part 2

WinLink 1000 Installation and Operation Manual Chapter 5 Diagnostics and Troubleshooting
State
Text
Color Desc.
Color
Color
fullCompatibility Active Green SW
Upgrade Available
Yellow Green
restrictedCompatibility Active -
SW
Version
mismatch
Magenta
(Same as
authentication
error)
SW Upgrade
Recommended
Yellow Magenta
(Same as
authentication
error)
softwareUpgradeRequired Active –
SW
Upgrade
Required
Brown (Major) SW Upgrade
Required
Yellow Brown (Major)
versionsIncompatibility Not
Active -
SW
Upgrade
Required
Red Local SW Upgrade
Required
Yellow Red
5.7 Testing WinLink 1000
WinLink 1000 supports activation of the internal and external
loopbacks on the local and remote units.
Æ
To activate a loopback:
1. From the Maintenance menu, choose Set Loopbacks.
The Loopbacks dialog box appears (see
Figure 5-7 ).
2. From the Local or Remote drop-down box, select a loopback that
you intend to run, and click OK.
A confirmation message appears.
3. Click OK to activate a loopback.
WinLink 1000 activates selected loopback. A loopback status
arrow in the Main menu turns green to indicate an active
loopback.
Æ
To deactivate a loopback:
• From the From the Local or Remote drop-down box of the
Loopbacks dialog box, select None and click OK.
Testing WinLink 1000 5-15