User's Manual Part 1

WinLink 1000 Installation and Operation Manual Chapter 4 Configuration
Figure 4-10. Configu ation Dialog Box r
3. Select the appropriate item in the left hand list to open a dialog
box.
4. Click Apply to save the changes.
4.6 Changing the Transmit Power
Each site can have a different transmit power level.
Æ
To change the Transmit Power:
1. Click Configuration from the main menu.
2. Select which site to configure.
The Configuration dialog box opens.
3. Select Air Interface. (See
Figure 4-11 )
Changing the Transmit Power 4-19