User's Manual Part 1

Chapter 4 Configuration WinLink 1000 Installation and Operation Manual
Air Interface Change the transmit power
Inventory View the hardware and software inventory.
Management Configure the IP address, Subnet Mask, Default
Gateway, and the Trap Destination.
Security Change the Community Values and the Link Password
Date and Time Set the date and time of the server and of the system
.
Advanced Configure the Bridge, define the LAN connection and set
the external alarm inputs.
From the Configuration dialog box, the following functions are
available by clicking the buttons at the top of the dialog box:
Backup Save a backup.ini file with the current configuration.
Restore Load the backup.ini file created by the backup.
Installation Mode Return to Installation Mode for the entire link.
Selecting the Mute check box before clicking the Install
Mode button mutes the Beeper.
Mute
Mutes the Beeper at startup. Reactivate the beeper during
alignment.
Æ
To edit the Configuration Parameters:
1. Click Configuration from the main menu.
2. Select which site to configure.
The Configuration dialog box opens. (See
Figure 4-10 )
4-18 Editing the Configuration Parameters