User's Manual Part 1

Chapter 4 Configuration WinLink 1000 Installation and Operation Manual
• For WinLink 1000 5.4 GHz ETSI version see WinLink 1000 5.4 GHz
ETSI
Version.
• For WinLink 1000-BRS systems see
WinLink 1000 BRS Version.
WinLink 1000 with Automatic Channel Select
Automatic Channel Select enables WinLink 1000 to change frequency
channels automatically if interference is detected on the current
operating channel.
Figure 4-3. Channel Select dialog box - Automatic Channel Select
Æ
To define automatic channel selection:
1. Select the main frequency from the Operating Channel menu.
2. Select the required Bandwidth 5, 10, or 20 MHz.
Note
F2.x GHz versions operate at 10 or 20 MHz steps only.
3. Click the check box if Automatic Channel Selection is required.
4-4 Selecting Channels