User's Manual Part 1

Chapter 3

Operation

This section provides the following information for WinLink 1000:

• Operating procedures (turning-on and turning-off)

• IDU indicators

• Normal Indications

• Default settings

• Managing the WinLink 1000

3.1 Turning On WinLink 1000

To turn on WinLink 1000:

• Connect the AC/DC converter to the IDU power connector and to

the mains. See

Chapter 2

for full instructions on connecting the

power.

The PWR indicator lights up (IDU-E only) and remains lit as long

as the IDU is receiving power.

WinLink 1000 requires no operator attention once installed, with the

exception of occasional monitoring of front panel indicators and

statistics data. Intervention is only required when WinLink 1000 must

be configured to its operational requirements, or diagnostic tests are

performed.

3.2 Controls and Indicators

IDU Front Panel Indicators

The front panel of the IDU and IDU-E includes a series of LED

indicators that show the operating status of the unit.

Figure

3-1

shows

Controls and Indicators 3-1