User's Manual Part 1

WinLink 1000 Installation and Operation Manual Chapter 2 Installation and Setup
The external equipment status is displayed on the Main screen of the
Manager in IDU-R systems.
Æ
To use the Backup Mode
1. Click Enabled Backup Mode.
2. Set which link is backup link; either WinLink 1000 or the external
equipment.
The second link becomes the main link.
Æ
To disable the Backup mode
1. Click Disable Backup Link
2. Set which link is the Main Link; either WinLink 1000 or the external
equipment.
Figure 2-19 shows the TDM backup screen.
Figure 2-19. TDM Backup, IDU-R units only
Installing the Link 2-29