User's Manual Part 1

WinLink 1000 Installation and Operation Manual Chapter 2 Installation and Setup

The Service Parameters dialog box opens.

WinLink 1000 BRS Version

Both sites in a BRS Link must be configured identically.

Any changes to the frequency settings cause the link to re-

synchronize. A short loss of servi e will occur during re-

synchronization.

Not

To Configure BRS Channel Settings

1. Set the Band Plan.

2. Select the Bandwidth required,

Single Band

Double Band

3. Select the Frequency from the pull-down menu.

4. Click Next. The system is re-synchronized to the changes.

Installing the Link 2-23