User's Manual Part 1

Quick Start Guide
Installation of WinLink 1000 should be carried out only by a qualified
technician. If you are familiar with WinLink 1000, use this guide to
prepare the units for operation. If you are not familiar with WinLink
1000, please read the Installation and operation Manual carefully.
1. Equipment Required
The following is a list of equipment required for installing a WinLink
1000 link:
• RJ-45 crimp tool (if pre-assembled cable is not used)
• Drill (for wall mounting only)
• IDU and ODU grounding cables
• O-PoE 10AWG grounding cable
• 13 mm (½″) spanner/wrench
• ODU to IDU cable if not ordered (outdoor class, CAT-5e, 4 twisted
pairs)
• ODU to O-PoE both cables (ETH and PoE) if not ordered (outdoor
class, CAT-5e, 4 twisted pairs)
• Cable ties
• Laptop running Windows 2000 or Windows XP.
2. Before the Installation
1. Verify that all equipment and tools are available.
2. Install the WinLink 1000 software on the laptop; the installation
takes several minutes.
The software installation leaves the WinLink 1000 Manager icon
on the desktop.
WinLink 1000 Before the Installation 1