User's Manual Part 1

Chapter 2 Installation and Setup WinLink 1000 Installation and Operation Manual
alternative password supplied with the product. See Changing the Link
Password fo more der tails.
17. Click Next.
The default link with a rate of 9 Mbps is evaluated.
The
Channel Setting dialog box appears. This dialog box may be
different according to the version that you have purchased.
Selecting Channels
WinLink 1000 later than version 1.300 have a feature called Automatic
Channel Select, which allows you to define several alternative
frequency channels if interference is detected on the channel in use.
• For WinLink 1000 with the Automatic Channel Select feature see
WinLink 1000 with Automatic Channel Select (applies to versions
after 1.300).
• For WinLink 1000 5.4 GHz ETSI version see
WinLink 1000 5.4 GHz
ETSI
Version.
WinLink 1000 with Automatic Channel Select
Automatic Channel Select (ACS) gives WinLink 1000 the ability to
change frequency channels automatically if interference is detected on
the current operating channel.
2-20 Installing the Link