User's Manual Part 1

Chapter 2 Installation and Setup WinLink 1000 Installation and Operation Manual
2.12 Over the Air Connection indication
During the login the Manager reports on over the air connection.
Note
Over the Air connection to remote unit is not recommended
• Select the relevant option for your login requirements.
Figure 2-11. Over the Air Connection
2.13 Installing the Link
During the installation procedure, the definition of all parameters is
automatically applied to both sides of the link.
Not
e
For HSS screens see Appendix F .
Æ
To install the link:
1. Verify that the management station is properly connected to the
same LAN as the IDU, and the WinLink 1000 Manager application is
running.
2. With BRS systems you need to activate the link at both sites, see
Appendix G for method. Once the link is activated, continue
installation from this point.
3. In the toolbar, click the Link Installation button.
The Installation wizard opens, (see
Figure 2-12 ).
2-16 Installing the Link