User's Manual Part 1

WinLink 1000 Installation and Operation Manual Chapter 2 Installation and Setup
The Login dialog box appears.
Figure 2-8. Login Screen
3. Select the Connection Mode for the IP Address:
 Local Mode:
Select Local Connection (Broadcast), if user is connected directly
to the IDU LAN port.
 Network Mode
Enter IP address (of the ODU)
Default address: 10.0.0.120
The Subnet mask is 255.0.0.0. Versions 1.700 and up, any valid
subnet mask may be used.
•
Note
The actual IP address i defined during link configuration (see Defining
the Management Add esses).
s
r
4. Enter the password
Default password –
admin (see the section on Changing the
Management Password
)
5. Click the Read only check box if entering the system as a Read only
user.
6. If you are a user with Read-Write permission, click Options to enter
the community options.
WinLink 1000 is protected with Community passwords. A user may
be defined with read-only permission or with read-write
permission. See the section
Changing Community Values for more
detail.
Starting the WinLink 1000 Manager Software 2-13